Choosing Paper, Ink and Printers for Printable Puzzles

Advice on paper weight, black ink, laser versus inkjet, copiers and saving supplies, so large-print puzzles come out dark and clear at home or in a center.

By Pepe Rivera · About 4 minute read

Start with plain white paper

Standard white copy paper is the best match for these puzzles. It gives the strongest contrast between the black print and the page, and it takes pencil well. The PDFs are made for US Letter, 8.5 by 11 inches. If your printer uses A4, choose Fit to page or Scale to fit in the print dialog and check the preview before printing.

Avoid glossy paper, which reflects light and holds pencil poorly, and avoid patterned or strongly colored sheets. A pale cream is fine; deep colors make the grid lines harder to see.

Single-sided or double-sided

For puzzles that will be written on, single-sided printing is the more comfortable choice. The back of the sheet stays blank, so nothing shows through and the page rests flat on a clipboard. Double-sided printing saves paper in a booklet but works best on heavier stock. Most copy paper is 20 pound; 24 pound is brighter and thicker, with less show-through.

Never print an answer key on the back of its own puzzle. Held to the light, it spoils the activity, and the sheet no longer works as a reusable master.

Black ink at normal quality

Our puzzles are black on white, so color ink is not needed. Choose Black and white or Grayscale in the print dialog, which can also stop a printer from using color cartridges for gray tones. Leave the quality on Normal. Draft or economy mode can make the letters pale, and pale print defeats the purpose of large print. Print one test copy and look at the thin grid lines, the word list and the edges of the page.

Laser or inkjet

A laser printer produces crisp, smudge-resistant text and suits a stack of twenty or more copies. An inkjet printer is fine for a few copies at home, though the ink needs a moment to dry. Some inkjet inks smear if a damp hand or a highlighter touches them, so give fresh pages time before handing them out. Pencil works on both. If you are choosing a printer for puzzles, a basic black-and-white laser model is plenty.

Copying a master

Many centers photocopy a printed master. Use a clean, dark original rather than a copy of a copy, and set the copier to a slightly darker setting if the first test looks gray. Check that the copier has not cropped the page, because the grid edges are close to the sheet's margin. Keep the master unmarked in a folder, with its answer page stored separately.

Save supplies without shrinking the print

You can save paper and ink without making the puzzle smaller:

  • Print only the pages you need. A word search PDF has a puzzle page and an answer page, so print page one for solvers.
  • Use the Print this one button under a single Sudoku or maze grid instead of printing a whole pack.
  • Choose one puzzle per page for people who like to write notes, and the four-per-page Sudoku PDF only for people comfortable with smaller cells.
  • Put pages in a clear sleeve and use a dry-erase marker, as described in printing large-print puzzles.

Match the setup to the job

Three common jobs call for three simple setups. A few pages at home work well on an inkjet with plain white paper, in black only. A weekly class set of twenty is better on a laser printer or a copier, which handles volume without smearing. A seasonal booklet may justify a heavier cover stock and a trip to a copy shop. You do not need special equipment for any of them. The best upgrade is usually a test copy before every batch.

When the print looks faint or cropped

Pale print usually has a simple cause: draft mode, a low toner or ink level, or a clogged print head. Switch to Normal quality first, then run your printer's cleaning cycle if the letters are still light. Cropped edges usually come from a Fit or Shrink setting or from the wrong paper size, so choose US Letter and 100 percent scale. If a line is missing from the grid, check the ink level and print again. Store paper flat in a dry place, because curled sheets jam and smudge more often.

At a library or copy shop

If you do not own a printer, save the PDF to a USB drive or email it to yourself. Ask for black and white, single-sided, US Letter, at 100 percent scale. Print one page first and check the darkness before ordering the full run. Many libraries offer printing for a small per-page fee. Keep a few spares of each puzzle in a folder, so one smudged page does not mean a second trip. A short note taped to the folder with the settings you used, such as black and white, Letter, 100 percent, saves you from working them out again next month. If you are building a gift, read how to make a puzzle booklet.

Put it into practice

More guides